1.Open SuvCE 2.Choose Equip ->Set Rover 3.The manufacture choose: NMEA GPS Receiver , and model choose: Generic As the figure 1 Shows 4.Then click Comms,Type choose Cable, port choose Com3 and Baud choose 19200 as the figure 2 shows. Then click OK 5.Open GPS power control software(a software), and click power on.as figure 3 Shows 6.Then the setup is OK, as figure 4 shows.
【Qmini M3】Como conectar o GNSS interno no SuvCE
Compartilhar:
17 de novembro de 2020
【Qmini M3】Como configurar a taxa de transmissão (BaudRate) no Qmini M3
17 de novembro de 2020