How can we help?
Frequently Asked Questions
How to connect bluetooth on Windows Mobile system
1.Device bluetooth connecting.
2.Software connecting.
[HTS220R]How to TS connect with SurvCE2.62
1.Set paramaters with total station.
2.Device connect with total station.
3.Do survey work and collect the point on the device.
More detailed operation refer to relevant file.
【Hi-Q Tools II】How to operate Hi-Q Tools II ?
Please refer to the video (https://youtu.be/dtI8igIIn0Q).
【Hi-GNSS】How to set NMEA output by Hi-GNSS software.
1.Open the Hi-GNSS software,double click “GPS-Off Line” to connect to the GPS.
2.Set rover parameters(Mark “Send Rover Position to Network”).
3.Click “POS”,and click arrow to do the NMEA setting.
4.Set the parameters(Interval).
【V30,SurvCE】How to do stop and go in SurvCE?
1.Set V30 as rover and get corrections from base and get fixed solution, then go to the “Log row GPS” interface.
2.Creat a new static data file and set the corresponding parameters and confirm it.
3.Go to store points in RTK mode.
【Hi-Static】How to operate the model of stop-go?
1.Set up base,collect static data.
2.Start up another receiver, waiting until tracked satellite, then do stop-go.
3.Collect static data through receiver panel or software.
【V30,HGO】How to set v30 antenna height by HGO?
Please refer to the bellow file
【Hi-Survey Road, V90Plus】How to get started with Tilt Survey?
1.Calibrate electronic bubble. (Connect V90 Plus in Hi-Survey Road software,then find Electronic bubble calibration in “Others” to do the calibrate).
2.Calibrate direction sensor.
3.Calibrate attitude deviation.
3.Do survey.(Auto collecting by “bubble is center”).