Find quick answers to the most common questions about our products, services, and support.

1.Setting on the total station.
2.Using the Hyper Terminal and connect total station, if there is no this software please download from the internet.
3.Setting parameters.
4.Following the prompts to upgrade.

1.Open the”PC-IO Data software” ->”.MEA file”
2.Output the” .MEA file”
3.Choose the out put coordinate format (Must remember the format you choose).
4.Save as the format you want (.CSV or .TXT maybe better).
5.Input the file (.CSV format) that has been saved above; Choose “Coordinate File”->Input.
6.Click “Input” when you can edit the data, but just can edit the coordinates noangle!

1.Open Total Station data transfer software. 2.Choose Coo file in the red frame, then click”import”to import the Coo file you just exported. 3.Choose the”*.DXF”, and then click”output”.

1.Copy the shortcut icon of Hi-Q:Long press the “Hi-Q”->click “Copy”.As figure 1 shows.
2.Click the place as figure 2 shows.Choose:My Device->Windows->Start Menu.

1.Open your progect(here use 33 file for example)->Import background.
2.Find your ZMP ->click “OK”.

1.Choose “Geoference Image”->File->Create ZMP file.
2.Choose the picture that wanted(support bmp,jpg,tif.png,gif format).
3.Choose the coordinate type and click “Next” 4.Set the projection such as the coordinates system then click “Ok”.
5.Then save the converted ZMP and finish.

1.Open”My device””->”control panel”->”stylus”->”calibration”.
2.You will get the figure below.Follow the cross-shaped flag to complete the calibration.
3.After finish the calibration and get the figure below,press the button “Ent”(this is very important).

1.Setting Base,click”Enable Glonass”option in tab”Difference”.
2.Setting Rover,click the same options.
3.In the Satellite View Page, Click”GLONASS”to see the satellites.