1.Run Hi-Net Server Software,to Tools Update with post diff result.
2.Mark on use log file, then click on change to enter Post-Processing interface.
3.Import Base raw data and Rover raw data. Input the known point coordinates of Base station.
4.Click onselect, create a file name for the result file, and then click on calculate,wait for finished. The program would process and generate a post-processed file (.log).
5.After processing finished, click on Add .prj to import Hi-Q project;then click on load and update, the processed result would apply to the project.

1.Tool->Data Import.
2.Click Add->change (define the saving path)->Next.
3.Choose coordinate system. Add Predefined means you can use the one that you have defined. Then click OK .
4.Open the xbw file in Hi-Q.Click project(88 project for example)->Open file.
5.Find your .xbw File.
6.Then you finish.

1.Run Hi-Net Server Software, Go to: Tools> Update with post diff result. 2.Mark on “use log file”, then click on “ change” to enter Post-Processing interface. 3.Import Base raw data and Rover raw data. Input the known point coordinates of Base station. 4.Click onselect, create a file name for the result file, and then click on calculate,wait for finished.The program would process and generate a post-processed file (*.log). 5. After processing finished, click on Add *.prj to import Hi-Q project; then click on load and update,the processed result would apply to the project.

1.Open “SSCOM” software,choose right com port and Open port.
2.Choose right parameter,baudrate 19200 etc.
3.Click EXT.
4.Click one by one to send all commands to V30.And then we get IMEI number of V30

1.Prepare a *.txt file that contain the points details in a correct format.
2.Click “Survey”and chose the point library you want.
3.Then click the last second buttons at the bottom of interface.
4.Make sure the points file was copied into your controller,find it out in a location/path.
5.Choose the points file. Click OK.

1.Switch on Receiver, set as UHF mode.
2.Run “GM-xxPx management software” program, choose your COM Port and baud rate “19200” 3.Input the frequence, please click “Apply”.
4.After get all the settings done, please click “Program” ,then wait for program finished.

1.Open Hi-RTK software, connect the GPS of V30.
2.After connecting GPS successfully, click Information->iRTK Setting->Set Irtk.
3.Choose the language as you want, then restart the V30, then the voice opened finished.

1.Open the Hi-RTK software.
2.Click”Survey”to go to the interface.
3.Click the “DXF” at the bottom of interface.
4.Then click “Load” to chose dxf or shp file.